Need help?Do you have a question about the GW Instek GPP-2323 and is the answer not in the manual?
General| Brand | GW Instek |
|---|---|
| Model | GPP-2323 |
| Category | Power Supply |
| Language | English |
Explains safety symbols used in the manual or on the instrument.
Provides general guidelines and warnings for safe operation and power supply usage.
Details safety instructions for using the power cord in the United Kingdom.
Lists the main features and specifications of the GPP series power supply.
Describes the components and layout of the front panel of the power supply.
Details the connectors and features on the rear panel of the power supply.
Details how to set voltage, current, and protection parameters for the output source.
Explains how to configure and operate each output channel independently.
Describes how to connect channels in series or parallel for increased voltage or current.
Describes how to create and execute custom voltage waveforms using sequences.
Describes how to generate pulse outputs with programmable delay and timing parameters.
Describes the live monitoring function to check channel status and halt operation based on preset conditions.
Explains how to use the live record function to save data for later analysis.
Details how to connect and control the power supply via an RS-232 serial connection.
Explains how to connect and control the power supply via USB, including driver installation.
Details how to set up and use LAN for remote control, including IP address and host name configuration.
Explains the structure and rules for SCPI commands used for remote control.
To Next Page