Need help?Do you have a question about the GW Instek GPP-4323 and is the answer not in the manual?
General| Number of Outputs | 4 |
|---|---|
| Ripple and Noise (CC) | ≤ 3 mArms |
| Output Voltage | 0 to 32 V |
| Output Current | 0 to 3 A |
| Ripple and Noise (CV) | ≤ 1 mVrms |
| Load Regulation (CV) | ≤0.01% + 3mV |
| Load Regulation (CC) | ≤0.2% + 3mA |
| Line Regulation (CV) | ≤ 0.01% + 2 mV |
| Line Regulation (CC) | ≤0.2% + 3mA |
| Display | 4.3 inch LCD |
| Interface | USB, RS232 |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -10 to 70 °C |
Provides general guidelines and warnings for safe operation and handling of the unit.
Highlights the main features, multiple outputs, CV/CC operation, and display.
Guides through checking AC voltage, connecting the power cord, and turning the unit on/off.
Details recommended cables, front panel wiring, and wire gauge considerations for connection.
Explains how to turn individual or all channel outputs on and off using panel controls.
Details setting output voltage (Vset), current (Iset), OVP, and OCP for each channel.
Describes operating each channel independently for setting and outputting voltage/current.
Explains how to link channels for doubled voltage (series) or current (parallel) output.
Details setting parameters for Load Mode (CV, CC, CR) including voltage, current, and resistance.
Describes how to set and enable remote control ports (RS-232, USB, GPIB, LAN).
Explains the SCPI command language structure, keywords, parameters, and symbols.
To Next Page