GW Instek GPP-4323 - Set Group Parameter

BASIC OPERATION
65
Set Group Parameter
Description
Each Group consists of Vltage, Current and Time.
Therefore, properly confirm parameter of each group is
correct before setting Delay output.
Parameter
Descriptiom
No.
Group number. Maximum 2047
State
Output status of each group: On,
Off
Time
Execution duration of each group.
Range: 1s – 300s
Patterm
Set the initial status of initial group.
01 Patt: start from Off; 10Patt: start
from On
Time set
It is used to generally set the pattern
of time change. Model is for the
changes covering fix (FixTime),
increase (Increase) and decline
(Decline). Base Time is for setting
time of initial Group. Step is for
setting time interval of neighboring
Group.
Parameter
Setting
No.
Under the Delay function, press the
F2 (Edit) button followed by
selecting the F1 (No.). The setting on
LCD is activated and appears in red
fond color . Use
number pad to set the parameters
directly and then press the F1
(Done) button to confirm; or use
arrow keys along with scroll wheel
to complete the setting.