GW Instek GPP-2323 - LAN

REMOTE CONTROL
103
LAN
Description
When using the LAN port, the relevant
parameters are supposed to be set earlier.
Connection
Select LAN port in the Interface after
connecting the LAN cable. The message LAN
will appear gray in the status bar when
connection, and turns to white color while the
first command connects succesfully.
Set port
Edit Host name
The front panel keys are automatically locked
when the connection is successful.
A. Press the System button to enter the system
interface followed by pressing the F1 (Interface)
button to configure port parameter.
B. Press the F4 (LAN) button to configure
internet port parameter.
A. Press the System button to enter the system
interface followed by pressing the F1 (Interface)
button to configure port parameter.
B. Press the F4 (LAN) button to configure
internet port parameter.
C. Press the F1 (Config) button to configure
relevant parameter.