GW Instek GPP-2323 - Restore Factory Default Settings

GPP Series User Manual
88
Restore Factory Default Settings
Description
There’s a group of Default value, the non-
modifiable factory default setting. User is able
to restore Default or proceed to Preset
operation from Power On under System.
Operation
Press the System button to enter the interface
followed by pressing either the F2 (Power On)
or the F5 (Preset) button to select Default.
Default setting of each channel
Channel item
Parameter
Channel
item
Parameter
Voltage
00.000V
5V(only 3323:CH3)
Current
0.0000A
OVP
CH1/2:
Off, 35V
CH3:
Off, 6V( 4323)
CH4:
Off, 16.5V( 4323)
OCP
CH1/2:
Off, 3.5A
Off, 7.0A( 1326)
CH3/CH4 :
Off, 1.2A( 4323)
Disp Type
Type1(1326:Type4)
Vset(Load)
1.500V
Model
PWR
Iset (Load)
0.000A
Tracking
Indep.
Rset(Load)
0050Ω
Default setting of system
System item
Parameter
System item
Parameter
Beep
On
Subnet Mask
255.255.0.0
Backlight
High
HOST Name
GPP
Power On
Default