GW Instek SPS-1230 - Operation; Constant Voltage Mode

SPS Power Supply User Manual
24
OPERATION
Constant Voltage Mode
Background
Before voltage can be output, please see page 22 to
set the current level.
Setting step
1. Connect the test leads to the EUT
with the power off.
P
O
W
E
R
a9a$
32:(5
),1(
*1'
&2$56(
2))21
$036
&2$56(
),1(
*1'
Load
2. Set the current and voltage knobs to the left
most position (0A, 0V).
3. Turn the instrument power on.