17
-1.Precaution
(1)AC input
AC input should be within the range of line voltage±15% 50/60Hz.
WARNING: To avoid electrical shock, the power cord protective grounding conductor must be
connected to ground.
(2)Installation
Avoid using the power supply in a place where ambient temperature exceeds 40℃. The heat sink located at rear of the power
supply must have sufficient space for radiation.
CAUTION: To prevent the instrument from damage, ensure the working environment is under 40℃
of temperature. If exceeding 40℃, please refer to the drawing shown as (3) of next page.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
