GW Instek PSW Series User Manual

OPERATION
51
Using the Rack Mount Kit
Background
The PSW series has an optional Rack Mount
Kit (GW Instek part number: [JIS] GRA-410-J,
[EIA] GRA-410-E[EIA]) that can be used to
hold 6x PSW Type I models, 3x Type II models,
2x Type III models or a combination of all
models (1x Type I, 1x Type II and 1x Type III).
Rack mount
diagram
Type I Type II Type III
How to Use the Instrument
Background
The PSW power supplies use a novel method
of configuring parameter values only using the
Voltage or Current knobs. The knobs are used
to quickly edit parameter values at 0.01, 0.1 or 1
unit steps at a time.
When the user manual says to set a value or
parameter, use the steps below.
Example
Use the Voltage knob to set a voltage of 10.05
volts.

GW Instek PSW Series Specifications

General

Ripple & Noise (CC)	≤ 3mArms
Protections	OVP, OCP, OTP
Remote Sense	Yes
Programmable	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Voltage Resolution	1mV
Current Resolution	1mA
Current Accuracy	±0.1% + 10mA
Ripple & Noise (CV)	≤1mVrms
Load Regulation (CC)	≤0.1% + 5mA
Line Regulation (CC)	≤0.1% + 5mA
Remote Interface	USB, RS232
Display	LCD