GW Instek PSW Series User Manual

PSW Series User Manual
54
View System Version and Build Date
Background
The F-89 configuration setting allows you to
view the PSW version number, build date,
keyboard version, analog-control version,
kernel build, test command version, test
command build date, and the USB driver
version.
Steps
1. Press the Function key. The
Function key will light up.
Function
2. The display should show F-
01 on the top and the
configuration setting for
F-01 on the bottom.
3. Rotate the Voltage knob to change
the F setting to F-89 (Show
Version).
Voltage
4. Rotate the Current knob to view
the version and build date for the
various items.
Current

GW Instek PSW Series Specifications

General

Ripple & Noise (CC)	≤ 3mArms
Protections	OVP, OCP, OTP
Remote Sense	Yes
Programmable	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Voltage Resolution	1mV
Current Resolution	1mA
Current Accuracy	±0.1% + 10mA
Ripple & Noise (CV)	≤1mVrms
Load Regulation (CC)	≤0.1% + 5mA
Line Regulation (CC)	≤0.1% + 5mA
Remote Interface	USB, RS232
Display	LCD