GW Instek PSW Series User Manual

PSW Series User Manual
108
Subnet Mask 1~4
Sets the subnet mask. The subnet mask is split
into four parts.
(F-43 : F-44 : F-45: F-46)
(0~255 : 0~255 : 0~255 : 0~255)
Gateway 1~4
Sets the gateway address. The gateway address
is split into 4 parts.
(F-47 : F-48 : F-49 : F-50)
(0~255 : 0~255 : 0~255 : 0~255)
DNS Address 1~4
Sets the DNS address. The DNS address is split
into 4 parts.
(F-51 : F-52 : F-53 : F-54)
(0~255 : 0~255 : 0~255 : 0~255)
Sockets active
Enables WebSocket connections.
F-57
0 = Disable, 1 = Enable
Web server active
Turns Web server control on/off.
F-59
0 = Disable, 1 = Enable
Web Password
active
Turns a web password on/off.
F-60
0 = Disable, 1 = Enable
Web Password
Sets the Web password.
F-61
0000 ~ 9999
System Settings
Factory Set Value
Returns the PSW to the factory default settings.
See page 158 for a list of the default settings.
F-88
0 = Disable, 1 = Return to factory
default settings.

GW Instek PSW Series Specifications

General

Ripple & Noise (CC)	≤ 3mArms
Protections	OVP, OCP, OTP
Remote Sense	Yes
Programmable	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Voltage Resolution	1mV
Current Resolution	1mA
Current Accuracy	±0.1% + 10mA
Ripple & Noise (CV)	≤1mVrms
Load Regulation (CC)	≤0.1% + 5mA
Line Regulation (CC)	≤0.1% + 5mA
Remote Interface	USB, RS232
Display	LCD