OPERATION
59
Panel Lock
The panel lock feature prevents settings from being changed
accidentally. When activated, the Lock/Local key will become
illuminated and all keys and knobs except the Lock/Local key and
Output key (if active) will be disabled.
If the instrument is remotely controlled via the USB/LAN interface,
the panel lock is automatically enabled.
Press the Lock/Local key to active the
panel lock. The key will become
illuminated.
Hold the Lock/Local key for ~3
seconds to disable the panel lock. The
key’s light will turn off.
Save Setup
The PSU has 3 dedicated keys (M1, M2, M3) to save the set current,
set voltage, OVP, OCP and ULV settings.
11. Press the SHIFT key. The shift key
will light blue.
12. Hold the desired memory key for
>3 seconds (M1, M2, M3).
To Next Page
Loading...
Need help?
General
