STEP 3 (See Diagram 3)
A. Attach the Leg Developer (#8) to the Front Stabilizer (#5). Secure it with one M10x70mm
Allen Bolt (#33), two Ø10mm Washers (#38), and one M10 Aircraft Nut (#41).
B. Insert two Foam Tubes (#11) halfway through the holes on the Leg Developer. Push four
Foam Rolls (#21) onto the Tubes from both sides.
C. Place a Spring Color (#22) onto the weight post on the Leg Developer.
DIAGRAM 3
6
STEP 4 (See Diagram 4)
To Next Page
Loading...