Gymtech 50510 - Step 5: Arm Curl Pad and Support Setup

12 pages

To Next Page

To Previous Page

STEP 5 (See Diagram 5)

A. Attach the Arm Curl Pad (#16) onto the Arm Curl Pad Support (#6), Align the holes secure with

two M8x15mm Allen Bolt (#35) and two ￠8mm Washer (#39).

B. Insert the Arm Curl Pad Support (#6) into the up opening of the Front Stabilizer (#5), select

desired height and secure with one M10 Lock Knob (#18).

DIAGRAM 5