EasyManua.ls Logo

GYS CT 160 - User Manual

GYS CT 160
18 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
22/01/2015
MADE in PRC
- EN 60335-2-29
CT 160
µc
EFFICACE
/ RMS
Moyen/Average
(EN 60335)
50-60hz
Reg 1 Reg 2 fuse
cm kg
230V 190W
12V 2 13.5A
7A 9A
15A 20.5x30x13.5 3.9
24V 2 7.5A
3A 5A
W
W
ex.
Battery 12V
BATTERY
CHARGER
12-24V
Ref. 024106
This traditionnal battery charger can charge 12V and 24V lead-acid or calcium batteries for
small cars, vans and agricultural vehicles.
• Copper wound transformer
• Clamp cables 1.5m
• Power supply cable 1.3m
• Thermal protection of the transformer
• Protection against polarity reversal with a 15A automotive fuse at the front.
• Isolated clamps
• Metallic casing
GENERAL PROTECTION
TECHNOLOGY
www.gys.fr
• To charge lead acid batteries with liquid electrolyte:
- 12V: from 25 to 160 Ah
- 24V: from 15 to 90 Ah
• Ammeter to indicate the charge
• 2 charge speeds: Normal and “Boost”.

Table of Contents

Other manuals for GYS CT 160

Preview: Manual
Manual36 pages
Preview: Instruction Manual
Instruction Manual8 pages

Questions and Answers

  • M
    Miss Sonia HarperSep 12, 2025
    What to do if GYS Battery Charger won't charge the battery?
    • T
      Tina TylerSep 12, 2025
      If your GYS Battery Charger is plugged in but not charging, there could be several reasons: * A blown fuse: Replace the fuse, making sure to use the correct value. * Poor clamp connection: Clean both the battery terminals and the charger clamps, and inspect the cables for damage. * Incorrect charge setting: Ensure the charge position matches the battery voltage.
  • V
    Virginia WalterSep 12, 2025
    Why does the fuse break as soon as I change it on my GYS Battery Charger?
    • C
      Casey GallagherSep 12, 2025
      If the fuse in your GYS Battery Charger breaks immediately after replacement, consider these possibilities: 1. Polarity reversal: Ensure the positive (+) clamp is connected to the positive (+) terminal of the battery, and the negative (–) clamp is connected to the negative (–) terminal. 2. Vehicle starting: Avoid attempting to start the vehicle while the charger is connected. 3. Incorrect charge setting: Verify that the charge position is appropriate for the battery voltage. 4. Current draw on the battery: Do not charge the battery while it is connected to the vehicle.
  • J
    Jordan ThompsonSep 15, 2025
    How to fix GYS Battery Charger if the ON/OFF switch doesn't light up?
    • B
      browningallisonSep 15, 2025
      If the ON/OFF switch on your GYS Battery Charger doesn't light up when in the ON position, it's likely due to a lack of power supply. Check that the power cable is securely plugged into a 230V 50/60Hz socket and verify your electrical installation.

GYS CT 160 Specifications

General IconGeneral
Fuse16 A
Protection classIP21
Dimensions30 x 12 x 23.5 cm
Weight4.7 kg
Mains voltage230 V
Input voltage230 V

Related product manuals