Why does the GYS Battery Charger indicator stay on even after pressing the button?
If the indicator stays on even after pressing the button on your GYS Battery Charger, it's likely due to thermal protection. The ambient temperature may be too high (above 50°C). To resolve this, cool the room and allow the charger to cool down.
What to do if the GYS GYSFLASH 12.12 indicator blinks?
If the indicator blinks on your GYS Battery Charger, the charger might be in sleep mode. To exit sleep mode, press the button or connect a battery to the charger.
What to do if the GYS Battery Charger indicator stays on even after pressing the button?
If the indicator remains on even after pressing the button, it might be due to thermal protection. The ambient temperature could be too high (above 50°C). Try cooling the room and allowing the charger to cool down.
Why does the GYS Battery Charger indicator blink?
The indicator might be blinking because the charger is in sleep mode. To exit sleep mode, press the button or connect a battery to the charger.
General| Brand | GYS |
|---|---|
| Model | GYSFLASH 12.12 |
| Category | Battery Charger |
| Language | English |
Covers essential safety guidelines and precautions for using the device.
Details risks associated with explosive gases emitted during battery charging.
Outlines the correct procedures for connecting and disconnecting the charger to the battery.
Provides a general description of the Gysflash charger and its capabilities.
Step-by-step guide to connect and start the battery charging process.
Explains different charge modes like Charge, Cold/AGM, Refresh, and Supply.
Details the 8-step charging curve, including analysis, charge, and absorption phases.
Outlines the built-in safety features protecting against short-circuits and polarity inversions.
Lists common symptoms, their causes, and recommended remedies.
Details the warranty coverage and exclusions for the product.
Presents detailed technical specifications and compliance standards.
Explains the function of each button and indicator on the control panel.
To Next Page
