What to do if GYS GYSFLASH 102.12 HF Battery Charger shows '#battery error'?
If your GYS Battery Charger displays '#battery error' and beeps, it could mean several things: the battery is short-circuited or damaged (in which case, change the battery), the battery is not connected or the clamps are short-circuited (check the clamps connection), or a 6V battery is connected (the charger is not suitable).
How to fix « #error (+)(-) » error on GYS GYSFLASH 102.12 HF Battery Charger?
If your GYS Battery Charger screen is flashing « #error (+)(-) » and beeping, it indicates that the polarity of the clamps has been reversed. To fix this, connect the red clamp to the (+) terminal and the black clamp to the (-) terminal of the battery.
General| Input Voltage | 230 V AC |
|---|---|
| Output Voltage | 12 V |
| Output Current | 100 A |
| Technology | High Frequency |
| Cable Length | 2.5 m |
| Battery Type | Lead-acid, Lithium |
| Battery Capacity | 20-1200 Ah |
| Battery Capacity Range | 20 - 1200 Ah |
| Charging Modes | Automatic, Recovery |
| Protections | Short-circuit, Overload, Overheating, Reverse polarity |
To Next Page
