To Next Page
K
Kristine BurkeSep 12, 2025
What to do if the anmeter's pin goes above the maximum marking on my GYS Battery Charger?
- CChristina FrederickSep 12, 2025
If the ammeter pin goes above the maximum marking on your GYS Battery Charger while set to minimum intensity, it could be because the battery is deeply discharged; continue charging using the minimum setting. Another possibility is a voltage error (12-24V); check that the switch is on the correct setting for your battery (12 or 24V). Finally, your battery might have elements in a short circuit, in which case you should replace the battery.
General
