EasyManua.ls Logo

GYS TCB 60 - User Manual

GYS TCB 60
48 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
72168_V9_17/11/2023
FR
EN
DE
ES
RU
2-8 / 46-48
9-14 / 46-48
15-21 / 46-48
22-27 / 46-48
28-33 / 46-48
TCB 60 / 90 / 120
www.gys.fr
Chargeur de batterie
Battery Charger
Batterieladegerät
Cargador de batería
Зарядное устройство
Accu lader
NL
IT
34-39 / 46-48
40-45 / 46-48
Caricabatteria

Table of Contents

Other manuals for GYS TCB 60

Preview: Instruction Manual
Instruction Manual8 pages

Questions and Answers

  • A
    Amy MooreAug 11, 2025
    What to do if GYS TCB 60 is properly connected but not charging?
    • M
      Michelle SimmonsAug 11, 2025
      If your GYS Battery Charger is connected correctly but isn't charging, there might be several reasons. First, the fuse may be blown and needs replacement. Second, the clamp connections could be bad, so clean the terminals and clamps, and check the condition of the cables. Third, the charge settings might be incorrect; ensure the selected voltage matches the battery voltage. Finally, after intensive use, the device may have entered thermal protection mode; allow it to cool down for about 15 minutes.
  • A
    Albert WoodsAug 17, 2025
    Why does the GYS TCB 60 Battery Charger fuse blow every time I replace it?
    • V
      Vernon ThompsonAug 17, 2025
      If the fuse in your GYS Battery Charger blows repeatedly after replacement, the issue might stem from several causes. Check for polarity reversal, ensuring the (+) clamp connects to the battery's (+) terminal and the (-) clamp to the battery's (-) terminal. Avoid starting the vehicle while the charger is connected. Also, verify that the selected voltage matches the battery voltage. Lastly, high current draw from the battery during charging can cause this; ensure no current is being drawn from the battery during charging.
  • B
    barbara65Aug 23, 2025
    What to do if none of the GYS Battery Charger indicators are switching on?
    • R
      Robert PaceAug 23, 2025
      If none of the indicators on your GYS Battery Charger are lighting up, it could be due to a couple of reasons. First, ensure the power cord is properly plugged into a 230V 50/60Hz socket and verify the power supply network. Second, check for short-circuited clamps or polarity reversal. Remove the clamps and inspect the fuses to see if they have melted, and check if the circuit breaker has tripped.
  • C
    Charles SmithAug 28, 2025
    How to fix GYS TCB 60 when the mains indicator doesn't switch on?
    • D
      Daniel SmithAug 29, 2025
      If the mains indicator on your GYS Battery Charger doesn't illuminate after plugging it in, the issue is likely related to the power supply. Ensure the power cord is connected to a 230V 50/60Hz socket and check the power supply network.
  • Z
    Zachary DeleonSep 4, 2025
    What to do if GYS Battery Charger end of charge indicator doesn't switch on after charging for a whole day?
    • A
      amanda60Sep 4, 2025
      If the end of charge indicator on your GYS Battery Charger doesn't turn on after a full day of charging, it suggests that the battery is likely damaged and needs to be replaced.

GYS TCB 60 Specifications

General IconGeneral
BrandGYS
ModelTCB 60
CategoryBattery Charger
LanguageEnglish

Related product manuals