EasyManua.ls Logo

GYS TCB 120 - User Manual

GYS TCB 120
48 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
72168_V9_17/11/2023
FR
EN
DE
ES
RU
2-8 / 46-48
9-14 / 46-48
15-21 / 46-48
22-27 / 46-48
28-33 / 46-48
TCB 60 / 90 / 120
www.gys.fr
Chargeur de batterie
Battery Charger
Batterieladegerät
Cargador de batería
Зарядное устройство
Accu lader
NL
IT
34-39 / 46-48
40-45 / 46-48
Caricabatteria

Table of Contents

Other manuals for GYS TCB 120

Preview: Instruction Manual
Instruction Manual8 pages

Questions and Answers

  • A
    Andrea DanielsAug 11, 2025
    What to do if GYS TCB 120 is properly connected but not charging?
    • M
      Mr. Jason HolmesAug 11, 2025
      If your GYS Battery Charger is connected correctly but isn't charging, there might be several reasons. First, the fuse may be blown and needs replacement. Second, the clamp connections could be bad, so clean the terminals and clamps, and check the condition of the cables. Third, the charge settings might be incorrect; ensure the selected voltage matches the battery voltage. Finally, after intensive use, the device may have entered thermal protection mode; allow it to cool down for about 15 minutes.
  • D
    Derek LeeAug 17, 2025
    Why does the GYS TCB 120 Battery Charger fuse blow every time I replace it?
    • L
      lsmithAug 17, 2025
      If the fuse in your GYS Battery Charger blows repeatedly after replacement, the issue might stem from several causes. Check for polarity reversal, ensuring the (+) clamp connects to the battery's (+) terminal and the (-) clamp to the battery's (-) terminal. Avoid starting the vehicle while the charger is connected. Also, verify that the selected voltage matches the battery voltage. Lastly, high current draw from the battery during charging can cause this; ensure no current is being drawn from the battery during charging.
  • K
    Kristy CraigAug 23, 2025
    What to do if none of the GYS Battery Charger indicators are switching on?
    • L
      Leah GuzmanAug 25, 2025
      If none of the indicators on your GYS Battery Charger are lighting up, it could be due to a couple of reasons. First, ensure the power cord is properly plugged into a 230V 50/60Hz socket and verify the power supply network. Second, check for short-circuited clamps or polarity reversal. Remove the clamps and inspect the fuses to see if they have melted, and check if the circuit breaker has tripped.
  • V
    Valerie TravisAug 29, 2025
    How to fix GYS Battery Charger when the mains indicator doesn't switch on?
    • T
      turnerbeckyAug 29, 2025
      If the mains indicator on your GYS Battery Charger doesn't illuminate after plugging it in, the issue is likely related to the power supply. Ensure the power cord is connected to a 230V 50/60Hz socket and check the power supply network.
  • D
    Destiny PriceSep 3, 2025
    What to do if GYS Battery Charger end of charge indicator doesn't switch on after charging for a whole day?
    • D
      Derek PalmerSep 4, 2025
      If the end of charge indicator on your GYS Battery Charger doesn't turn on after a full day of charging, it suggests that the battery is likely damaged and needs to be replaced.

GYS TCB 120 Specifications

General IconGeneral
Input Voltage230 V AC
Output Voltage12 V DC
Charging TypeAutomatic
Battery TypeLead-acid (GEL, AGM, Wet)
Protection FeaturesReverse polarity, Short circuit, Overheating

Related product manuals