H3C MSR 20 - Page 173

FIC-1T1/FIC-2T1/FIC-4T1 and FIC-1T1-F/FIC-2T1-F/FIC-4T1-F 173
Interface LEDs The following figure illustrates the FIC-1T1 panel.
Figure 211 FIC-1T1 panel
The following figure illustrates the FIC-2T1 panel.
Figure 212 FIC-2T1 panel
The following figure illustrates the FIC-4T1 panel.
Table 118 Interface attributes of the FIC-T1/FIC-T1-F cards
Attribute Description
Connector RJ-45
Number of connectors 1 (FIC-1T1/FIC-1T1-F)
2 (FIC-2T1/FIC-2T1-F)
4 (FIC-4T1/FIC-4T1-F)
Interface standard G.703/T1 102
G.704
AT&T TR 54016
AT&T TR 62411
ANSI T1.403
Interface rate 1.544 Mbps
Cable type T1 cable (100-ohm straight-through
shielded cable)
Operating mode CT1, ISDN PRI (only supported by the
FIC-T1 cards)
FT1 (only supported by the FIC-T1-F cards)
Supported service Backup
Leased line
ISDN PRI (only supported by the
FIC-1T1/FIC-2T1/FIC-4T1 card)