Need help?Do you have a question about the H3C MSR 30-20 ROUTER and is the answer not in the manual?
General| Type | Router |
|---|---|
| Form Factor | Desktop |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Model | MSR 30-20 |
| Power Supply | AC 100-240 V |
| Routing Protocols | RIP, OSPF, BGP, IS-IS |
| Remote Management Protocol | SNMP, Web |
| Network / Transport Protocol | TCP/IP, UDP, ICMP |
| Features | VPN, Firewall, QoS |
| Operating Temperature | 0°C to 45°C |
Specifies general environmental requirements for installation.
Procedures to prevent ESD damage.
General safety warnings and recommendations.
Presents a flowchart of the router installation steps.
Details the procedure for connecting the protection ground.
Instructions for connecting the power cord.
An overview of the router startup process.
Procedure for powering on the router.
Lists various methods for software maintenance.
How to access and navigate the BootROM menu.
Procedure for upgrading BootROM via serial.
Detailed steps for upgrading BootROM.
Procedure for upgrading application via serial.
Procedure for upgrading application via Ethernet.
Steps to configure Ethernet settings for upgrades.
Using CLI for maintenance.
Using TFTP for router maintenance.
Using FTP for router maintenance.
Procedures for handling lost passwords.
Addresses issues with the router's power system.
Addresses issues with the configuration system.
Addresses problems during software upgrades.
To Next Page
