H3C MSR 30-20 ROUTER User Manual

7-2
Reconfigure the parameters if their values are different.
Troubleshooting Application Image Upgrade
Symptom 1:
Symptom:
Start the router and upgrade the software using TFTP. The following is displayed:
boot device : mottsec
unit number : 1
processor number : 0
file name : main.bin
inet on ethernet (e) : 192.168.0.2
host inet (h) : 192.168.0.1
user (u) : guest
ftp password (pw) : 123456
flags (f) : 0x80
Loading...
Done!
0 bytes downloaded.
Something wrong with the file.
Solution:
Fault occurs because the source file does not exist or the network cable is not connected, or the IP
address is not correct. Ensure that the source file is in the TFTP root directory and the cable is
connected securely and the IP address is correctly assigned.
Symptom 2:
Symptom:
Start the router and upgrade the software using TFTP. The following is displayed:
boot device : mottsec
unit number : 1
processor number : 0
file name : main.bin
inet on ethernet (e) : 192.168.0.2
host inet (h) : 192.168.0.1
user (u) : guest
ftp password (pw) : 123456
flags (f) : 0x80
Loading...
Done!
11487495 bytes downloaded.
Something wrong with the file.
Solution:

H3C MSR 30-20 ROUTER Specifications

General

Brand	H3C
Model	MSR 30-20 ROUTER
Category	Network Router
Language	English