H3C MSR 30-20 ROUTER User Manual

5-21
any interface is OK) is set to 192.168.0.2. Both can use the ping command to check if the connection is
successful.
Step 2: Maintain the router through the terminal connected to the console port as follow:
<DEVICE>ftp 192.168.0.1
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1.
220 3Com 3CDaemon FTP Server Version 2.0
User(192.168.0.1:(none)): guest
331 User name ok, need password
Password:
230 User logged in
[ftp]
Use the command as follows to maintain the router.
Here, get and put commands are used to backup and recover files.
[ftp]get main.bin main.bin
cf:/main.bin has been existing. Overwrite it?[Y/N]:y
200 PORT command successful.
150 File status OK ; about to open data connection
226 Closing data connection; File transfer successful.
FTP: 14323376 byte(s) received in 69.256 second(s) 206.00K byte(s)/sec.
[ftp]put main.bin main.bin
200 PORT command successful.
150 File status OK ; about to open data connection
226 Closing data connection; File transfer successful.
FTP: 14323376 byte(s) sent in 15.974 second(s) 896.00Kbyte(s)/sec.
[ftp]quit
221 Service closing control connection
Maintaining Application Program and Configuration File
You can modify and display the file type under the file control submenu:
Enter <4> under the main BootROM menu to enter the file control submenu. The system prompts:
========================<File CONTROL>=======================
|Note:the operating device is CF Card |
| <1> Display All File |
| <2> Set Application File type |
| <3> Set Configuration File type |
| <4> Delete File |
| <5> Exit To Main Menu |
=============================================================
Enter your choice(1-5):
Display all files
Enter <1>, and the system prompts:

H3C MSR 30-20 ROUTER Specifications

General

Brand	H3C
Model	MSR 30-20 ROUTER
Category	Network Router
Language	English