EasyManua.ls Logo

H3C MSR 20 - Page 90

H3C MSR 20
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90 CHAPTER 3: MULTIFUNCTIONAL INTERFACE MODULES
Figure 99 MIM-8E1 (120-ohm) panel
Figure 100 MIM-8E1 (75-ohm) panel
The following table describes the LEDs on the MIM-8E1/MIM-8E1-F panel:
Interface Cable The MIM-8E1/MIM-8E1-F module provides eight E1 ports and adopts a 120-ohm
or a 75-ohm 8E1 conversion cable. The two types of cables look similar. Both of
them have a DB-68 connector at one end for connecting the router. At the other
end, however, the 75-ohm 8E1 conversion cable provides 16 coaxial cable
connectors; and the 120-ohm 8E1 conversion cable provides eight twisted pair
cable connectors, as shown in the following figures:
Figure 101 75-ohm 8E1 conversion cable
Table 51 Description of the LEDs on the MIM-8E1/MIM-8E1-F panel
LED Description
LINK OFF means no link is present; ON
means a link is present.
ACTIVE OFF means no data is being
transmitted or received. ON means
data is being transmitted or received.

Table of Contents

Related product manuals