5
Link
Link state of the IRF port:
• UP—The IRF link is up.
• DOWN—
The IRF link is down because the port has no physical link or
has not been activated by the irf-port-
active command.
• DIS—No physical interfaces have been bound to the IRF port.
• TIMEOUT—IRF hello interval has timed out.
• ISOLATE—The device is isolated from the IRF fabric. This issue might
be caused by the following reasons:
The IRF fabric does not support the device model.
The maximum number of member devices has exceeded the upper
limit.
neighbor
IRF member ID of the device connected to the IRF port.
This field displays three hyphens (---) if no device is connected to the port.
Belong To
IRF fabric that has the device, represented by the CPU MAC address of the
master in the IRF fabric.
Related commands
display irf
display irf configuration
display mad
Use display mad to display MAD status and settings.
Syntax
display mad [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed MAD information. If you do not specify this keyword, the command only
displays whether a MAD mechanism is enabled or disabled.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled.
MAD BFD enabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Multi-active recovery state: No
To Next Page
Loading...
