EasyManuals Logo

H3C S7500E Series User Manual

H3C S7500E Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
21
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter EVI tunnel interface
view.
interface tunnel
number [
mode
evi
]
N/A
3. Enable EVI flooding.
evi flooding enable
By default, EVI flooding is
disabled.
Enabling selective flooding for a MAC address
CAUTION:
Do not configure selective flooding for local unicast MAC addresses. The setting might cause
remote devices to drop packets destined for the MAC address.
By default, the device floods unknown unicast and multicast frames only to internal interfaces.
If an application uses a special multicast address that requires flooding across sites and cannot be
added to a multicast forwarding table by IGMP snooping, enable selective flooding for the multicast
address.
To enable selective flooding for a MAC address:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter EVI tunnel interface
view.
interface tunnel
number [
mode
evi
]
N/A
3. Enable selective flooding for
the MAC address in a set of
VLANs.
evi selective-flooding
mac-address
mac-address
vlan
vlan-id-list
By default, selective flooding is
disabled for all MAC addresses.
Displaying and maintaining EVI
Execute display commands in any view and reset commands in user view.
Task Command
On an ENDS, display IPv4 ENDS
information.
display evi neighbor-discovery server summary
On an ENDS, display IPv4 neighbors
that have registered with the ENDS.
display evi neighbor-discovery
server member
[
interface
tunnel
interface-number
|
[
local
local-ip |
remote
client-ip ]
[
vpn-instance
vpn-instance-name ] ]
On an ENDS, display ENDS statistics.
display evi neighbor-discovery server statistics interface
tunnel
interface-number
Display IPv4 ENDC information.
display evi neighbor-discovery client summary
Display IPv4 neighbors that an ENDC
has learned.
display evi neighbor-discovery
client member
[
interface
tunnel
interface-number | [
local
local-ip |
remote
client-ip |
server
server-ip ] [
vpn-instance
vpn-instance-name ] ]
Display ENDC statistics.
display evi neighbor-discovery client statistics interface
tunnel
interface-number
Display EVI-Link interface information
display evi link interface tunnel
interface-number

Other manuals for H3C S7500E Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S7500E Series and is the answer not in the manual?

H3C S7500E Series Specifications

General IconGeneral
BrandH3C
ModelS7500E Series
CategorySwitch
LanguageEnglish

Related product manuals