5-37
Swap Swap memory.
Displaying the operational status of power
modules
Use the display power command to display the operational status of power modules.
<Sysname> display power
Power 0 Status: Normal
Power 1 Status: Absent
Table5-4 Output description
Power Number of the power module.
Status
Power module state:
• Normal—The power module is operating correctly.
• Absent—The power module is not in position.
• Abnormal—The power module has failed.
Displaying the temperature information of the
firewall
Only F1020, F1030, F1050, F1060, F1070, F1080, and F1090 firewalls support the
display
Use the display environment command to display the temperature information of the firewall.
<Sysname> display environment
System Temperature information (degree centigrade):
--------------------------------------------------------------------------------
---------
Sensor Temperature LowerLimit Warning-UpperLimit Alarm-UpperLimit Shutdown-U
pperLimit
inflow 1 26 -5 48 56 NA
Table5-5 Output description
Sensor
Temperature sensor:
• inflow—Air inlet vent temperature sensor.
• outflow—Air outlet vent temperature sensor.
• hotspot—Hotspot temperature sensor.
Temperature Current temperature.
LowerLimit Low temperature alarm threshold.
To Next Page
Loading...
Need help?
General
