H3C SecPath F10 0 Series User Manual

8-58
Table7-23 10 GE fiber port specifications
Item
Specification
Connector type LC
Transceiver module type SFP+
Standard compliance 10GBASE-R
Interface speed LAN PHY: 10.3125 Gbps/1000 Mbps
Table7-24 10 Gbps SFP+ transceiver module specifications
Transceiver module
Central
wavelength
Connector Fiber
Max
transmission
distance
SFP-XG-SX-MM850-A 850 nm LC
50/125 µm multi-mode
optical fiber
300 m (984.25 ft)
82 m (269.03 ft)
66 m (216.54 ft)
62.5/125 µm
multi-mode optical
fiber
33 m (108.27 ft)
26 m (85.30 ft)
SFP-XG-LX220-MM131
0
1310 nm LC
62.5/125 µm
multi-mode optical
fiber
220 m (721.78 ft)
50/125 µm multi-mode
optical fiber
220 m (721.78 ft)
100 m (328.08 ft)
SFP-XG-LX-SM1310 1310 nm LC
9/125 µm single-mode
optical fiber
10 km (6.21 miles)
SFP-XG-LH40-SM1550 1550 nm LC
9/125 µm single-mode
optical fiber
40 km (24.86 miles)
NOTE:
The 10 GE fiber ports on the F1090 support only SFP-XG-LH40-SM1550 transceiver modules.
8 Appendix B LEDs
The F10X0 firewalls use similar LEDs. This section uses the LEDs on the F1080 firewall as an
example.

H3C SecPath F10 0 Series Specifications

General

Brand	H3C
Model	SecPath F10 0 Series
Category	Network Hardware
Language	English