H3C UniServer E3200 G3 User Manual

33
Figure 56 Array Configuration screen
3. On the screen as shown in Figure 57, navigate to the target drive and press Insert or the
space bar to select it. Repeat this step to add more drives, and press Enter.
Figure 57 Selecting the target drive
4. On the screen as shown in Figure 58, set the values for RAID Level, Logical Drive Name,
Strip/Full Stripe Size, Parity Group Count, Build Method, Size, and Acceleration Method.
Then, select Done and then press Enter. For more information about the parameter
description, see Table 4.

H3C UniServer E3200 G3 Specifications

General

Brand	H3C
Model	UniServer E3200 G3
Category	Server
Language	English