3
Launching and exiting iFIST
Launching iFIST (applicable to H3C UniServer
R4900/4700/2900/2700 G3)
To launch iFIST, use either of the following methods:
• Method 1:
a. Boot the server.
b. On the POST screen shown in Figure 1,
press F10 to launch iFIST.
Figure 1 Launching iFIST from the POST screen
• Method 2:
a. Boot the server.
b. On the POST screen shown in Figure 1,
press ESC or DEL.
The BIOS setup screen opens.
c. Click the Save&Exit menu, as shown in Figure 2
d. Selec
t Launch iFIST, and then press Enter.
To Next Page
Loading...
