H3C UniServer R4950 G3 User Manual

43
Figure 75 Storage controller configuration screen
2. On the screen as shown in Figure 76, you can see information about all available drives.
Figure 76 Drive information
Locating drives
1. Select the target drive on the screen as shown in Figure 76 and press Enter.
2. On the screen as shown in Figure 77, select Identify Drive and press Enter. The Fault/UID
LED on the drive turns steady blue.

H3C UniServer R4950 G3 Specifications

General

Brand	H3C
Model	UniServer R4950 G3
Category	Server
Language	English