H3C WA2610E-AGN Fundamentals Configuration Guide

11-23
Table 11-7 Common command line errors
Error information Cause
The command was not found.
The keyword was not found.
Parameter type error
% Unrecognized command found at '^' position.
The parameter value is beyond the allowed range.
% Incomplete command found at '^' position. Incomplete command
% Ambiguous command found at '^' position. Ambiguous command,
Too many parameters Too many parameters
% Wrong parameter found at '^' position. Wrong parameter

H3C WA2610E-AGN Specifications

General

Brand	H3C
Model	WA2610E-AGN
Category	Wireless Access Point
Language	English