ES0205l 12-00
3
WARRANTY REGISTRATION CERTIFICATE
The HAAS Mini Mill Machining Centers are warranted exclusively by Haas Automations limited warranty as follows:
Each Haas Mini Mill CNC machine and its components (except those listed below under limits and exclusions) is warranted
against defects in material and workmanship for a period of six (6) months from the date of installation.
Date of installation is the date that a particular machine is installed at the end user.
An additional six (6) month warranty extension may be purchased from your authorized Haas distributor.
LIMITS and EXCLUSIONS
Components subject to wear during normal use and over time such as paint, window finish and condition, light bulbs, seals,
etc., are excluded from this warranty.
Factory-specified maintenance procedures must be adhered to and recorded in order to maintain this warranty.
This warranty is void if the unit is subjected to misuse, neglect, accident, improper installation or application, or if the unit was
improperly repaired by the customer or by an unauthorized service technician. Warranty service is available from your
authorized Haas distributor.
Haas Automation is not responsible for any additional or incidental damage to parts, fixtures, machines or loss of time that
may be caused by a malfunction.
This warranty is transferrable from the original end-user to another party if the machine is sold via private sale before the end
of the warranty period.
NOTE: Should you have a problem with your machine, please consult your owner's manual first. If this does not
resolve the problem, call your authorized Haas distributor. As a final solution, call Haas directly at the
number indicated below.
Haas Automation, Inc.
2800 Sturgis Road
Oxnard, California 93030-8933
Phone: (805) 278-1800
FAX: (805) 278-0861
In order to record the end user of this machine for updates and for product safety notices, we must have the machine registration
returned immediately. Please fill out completely and mail to the above address to ATTENTION MINI MILL REGISTRATIONS.
Please include a copy of your invoice to validate your warranty date and to cover any additional options you may have
purchased.
Company Name: _________________________________ Contact Name: ___________________________________
Address: __________________________________________________________________________________________
Dealer: ____________________________________________________________________________________________
Date Installed: ___________________________________
Model No. : ______________________________________ Serial Number: ___________________________________
Telephone: ( ) _______________________________ FAX: ____________________________________________
IMPORTANT NOTICE!!! PLEASE READ IMMEDIATELY!!!
This machine is equipped with an electronically-recorded serial number that cannot be altered. This is done to protect you in
case of theft and to track machines when sold to other owners. After approximately 800 hours of use, the machine will automati-
cally shut down if it has not been unlocked by Haas Automation. To unlock the machine, we must have the above registration
with the serial number and the authorization from your dealer. You will receive a number from Haas that you will write in over the
serial number on setting page (#26). The authorization from the dealer will come upon final acceptance of the machine. If, for any
reason, the serial number of the machine is erased in memory, the machine will revert back to 200 hour limit for your protection.
To Next Page
Loading...
Need help?
General
