Need help?Do you have a question about the Haas Mini Mill and is the answer not in the manual?
General| Spindle Speed | 6, 000 rpm |
|---|---|
| X Axis Travel | 406 mm (16 in) |
| Y Axis Travel | 305 mm (12 in) |
| Z Axis Travel | 254 mm (10 in) |
| Spindle Power | 5.6 kW (7.5 hp) |
| Tool Capacity | 10 tools |
| Table Size | 914 mm x 305 mm (36 in x 12 in) |
| Spindle Taper | CT40 |
| Rapid Traverse X Axis | 15.2 m/min (600 in/min) |
| Rapid Traverse Y Axis | 15.2 m/min (600 in/min) |
| Rapid Traverse Z Axis | 15.2 m/min (600 in/min) |
Details the warranty period and extension options for Haas Mini Mills.
Lists components and conditions excluded from the warranty.
Components and conditions excluded from warranty coverage.
Crucial information regarding machine unlock after 800 hours of use.
Provides physical dimensions of the Mini Mill with labeled parts.
Illustrates the space requirements for the Mini Mill installation.
Details table dimensions, travel specs, and T-slot configuration.
Outlines spindle taper, speed, transmission, and motor ratings.
Covers feed rates, tool changer, air, coolant, power, and weight.
Covers voltage, wire gauge, grounding requirements, and safety warnings.
Lists fault codes, their descriptions, and diagnoses for the 320V Power Supply.
Details coolant reservoir capacity, filling, and base levelling requirements.
Information on spindle lubrication as part of normal machine operation.
Lists optional features like Floppy Drive, BT Tooling, 4th-Axis, and Coolant Pump.
To Next Page
