Need help?Do you have a question about the Haas VF-3 and is the answer not in the manual?
General| Category | CNC Vertical Machining Center |
|---|---|
| X Axis Travel | 40 in |
| Y Axis Travel | 20 in (508 mm) |
| Z Axis Travel | 25 in |
| Spindle Power | 30 hp |
| Spindle Taper | BT-40 |
Explains the importance of leveling for accuracy and how to perform rough leveling.
Instructions for performing fine leveling and checking the table flatness.
Details the anchoring kit contents and required tools for machine installation.
Specifies the concrete foundation requirements, including size and reinforcement.
Details on connecting the three-phase power to the machine's main switch.
Explains the horizontal number line for absolute and incremental positioning.
Differentiates between absolute and incremental positioning methods.
Explains the structure of a program and the use of G and M codes.
Summary of G codes, including their group, function, and description page.
Lists M codes and their basic functions, categorized by operation type.
Introduction to the Advanced Editor for editing CNC programs.
Introduces macros as a feature for programming flexibility and advanced control.
Overview of settings pages and how to change machine operation values.
Lists parameters and their descriptions, covering axes and gains.
To Next Page
