Need help?Do you have a question about the Haas VF-6 and is the answer not in the manual?
General| Machine Type | Vertical Machining Center |
|---|---|
| Spindle Motor | 30 hp |
| Travels X Axis | 64 in (1626 mm) |
| Travels Y Axis | 32 in (813 mm) |
| Travels Z Axis | 30 in (762 mm) |
| Spindle Speed | 8, 100 rpm |
| Rapid Traverse on X | 25.4 m/min |
| Rapid Traverse on Y | 25.4 m/min |
| Rapid Traverse on Z | 25.4 m/min |
To Next Page
