Name: Haas VF-6
Brand: Haas
Rating: 5 (1 reviews)

To Next Page

To Previous Page

INSTALLATION

June 1999

96-8000

9. Run the primary coolant system for four minutes to prime the bag filter housing before using the

TSC system.

Figure 4.0 Filter Gauge Indicator

REPLACEMENT F ILTER B AGS

Change the filter bag when the filter gauge indicator displays a vacuum level of -5 inHg or more. Do not allow

the suction to exceed -10 inHg or pump damage may occur (refer to figure 4.0). HAAS recommends using 25

micron rated filter bags (one is provided with the unit). Replacement bags can be purchased from local filter

suppliers or from HAAS (Part No. 93-9130). (Finer micron ratings can be used if desired)

Questions and Answers:

Need help?

Do you have a question about the Haas VF-6 and is the answer not in the manual?

Haas VF-6 Specifications

General