Name: Haas VF-6
Brand: Haas
Rating: 5 (1 reviews)

To Next Page

To Previous Page

96-8000 73

MAINTENANCE

June 1999

2.1 TSC MAINTENANCE

 Check dirt indicator on 100 micron filter with TSC system running and no tool in the spindle. Change

element when the indicator reaches the red zone.

 On newer machines, clean pump intake filter when indicator is in red zone. Reset indicator with button.

All intake filters can be cleaned with a wire brush.

 After changing or cleaning filter elements, run TSC system with no tool in spindle for at least one

minute to prime system.

Figure 2-1. TSC coolant pump assembly. Figure 2-2. Cleaning the intake filter.

To clean the filter:

Turn off the coolant pump.

Remove the filter.

Clean and reinstall filter.

Questions and Answers:

Need help?

Do you have a question about the Haas VF-6 and is the answer not in the manual?

Haas VF-6 Specifications

General