Haas VF-10 User Manual

281
PARAMETERS
June 1999
96-8000
Parameter 93 G MACRO CALL O9012
Same as 91
Parameter 94 G MACRO CALL O9013
Same as 91
Parameter 95 G MACRO CALL O9014
Same as 91
Parameter 96 G MACRO CALL O9015
Same as 91
Parameter 97 G MACRO CALL O9016
Same as 91
Parameter 98 G MACRO CALL O9017
Same as 91
Parameter 99 G MACRO CALL O9018
Same as 91
Parameter 100 G MACRO CALL O9019
Same as 91
Parameter 101IN POSITION LIMIT X
How close motor must be to endpoint before any move is considered complete when not in
exact stop (G09 or G61). Units are encoder steps. This parameter does not apply to feeds.
Parameter 102 IN POSITION LIMIT Y
Same definition as Parameter 101.
Parameter 103 IN POSITION LIMIT Z
Same definition as Parameter 101.
Parameter 104 IN POSITION LIMIT A
Same definition as Parameter 101.
Parameter 105 X MAX CURRENT
Fuse level in % of max power to motor. Applies only when motor is stopped.
Parameter 106 Y MAX CURRENT
Same definition as Parameter 105.
Parameter 107 Z MAX CURRENT
Same definition as Parameter 105.

Haas VF-10 Specifications

General

Brand	Haas
Model	VF-10
Category	Power Tool
Language	English