What to do if the battery icon flashes on Hach 9531600 Measuring Instruments?
If the battery icon flashes on your Hach Measuring Instruments device, it indicates that the batteries have less than 10% power remaining. To resolve this, replace all four batteries.
What to do if the temperature value is out of range on Hach 9531600 Measuring Instruments?
If the temperature value is not within the operating temperature range of the Hach Measuring Instruments tester or a temperature sensor failure occurred, ensure that the sample temperature is within the operating temperature range of the tester. Contact technical support as necessary.
How to fix slow stabilization on Hach 9531600?
If you are experiencing slow stabilization with your Hach Measuring Instruments, try soaking the sensor in the applicable cleaning agent or rinse/soak the sensor in deionized water for 1 minute.
Shows measurements, calibration standard information, and indicator icons on the display.
Details the functions of the power, calibration/settings, and lock keys on the device.
Step-by-step guide for calibrating the tester using an auto-recognition standard.
Instructions for taking salinity measurements, including sample handling and locking the reading.
Guide to adjusting unit preferences, auto-off timer, and resetting to factory defaults.
Instructions for cleaning the sensor for optimal performance and accuracy.
Guidance on when and how to replace the device's batteries.
Solutions for common error messages and device behaviors.
General| Model | 9531600 |
|---|---|
| Type | pH/ORP Sensor |
| Category | Measuring Instruments |
| Measurement Range ORP | -2000 to +2000 mV |
| Measurement Range pH | 0 to 14 pH |
| Pressure Rating | 0 to 6 bar |
| Cable Length | 10 m |
| Application | Water Quality Monitoring |
| Process Connection | 3/4" NPT |
To Next Page