37
SECTION 4, continued
4.6 Erasing User-entered Programs
Note: When a user-
entered program is erased,
all stored data associated
with that program is
also erased.
User-entered programs are automatically deleted when another
user-entered program is entered and stored in the previously
entered method’s storage number (101–110). They also may be
erased from the instrument memory as follows:
1. Press the
I/O key to turn the instrument on.
2. Press the
SETUP key.
3. Scroll to the
USER option and press ENTER.
4. Enter the program number of the method to be erased and
then press
ENTER.
5. Scroll to the concentration data for STD 1 using the down
ARROW key. Press ENTER.
6. Press
CE. Press ENTER.
7. Press the
EXIT key. ERASE? will be displayed.
8. Press the
ENTER key to erase the method or the EXIT key to
retain it in memory.
To Next Page
Loading...
