98
Expanded programs
Concentration Factor:
1. Press Concentration Factor: Off in the "Options" menu.
2. Press On to highlight this feature.
3. Press Factor and enter the factor.
4. Press Unit and select the corresponding units for
concentration from the displayed list.
5. Press OK to confirm.
Concentration Resolution:
1. Press Concentration Resolution in the "Options" menu.
2. Select the resolution.
3. Press OK to confirm.
4. Next press Return to return to the results screen.
Save as User Program To store the selected parameters as a User Program, refer to section 6.1, page 73.
Recall measurement
data
Recall saved measurement data, wavelength scans or time courses, refer to section 5.3,
page 43.
Instrument Setup mode Basic data of the instrument, refer to section 5.2, page 27.
Table 12 Options for Single Wavelength(Continued)
Options Description
To Next Page
Loading...
