A
Ashley MichaelSep 12, 2025
What does 'WRONG LINEAR TC' mean on my Hach Accessories?
- Ddestiny55Sep 12, 2025
If the Hach Accessories display 'WRONG LINEAR TC', the value must be between 0 and 4%/°C; 0 to 200 °C.
To Next PageTo Next PageWhat does 'WRONG LINEAR TC' mean on my Hach Accessories?
If the Hach Accessories display 'WRONG LINEAR TC', the value must be between 0 and 4%/°C; 0 to 200 °C.
What does 'WRONG TC TABLE' mean on my Hach Accessories?
If the Hach Accessories display 'WRONG TC TABLE', the temperature is above or below the temperature range defined by the table.
General| Parameter | Silica (SiO₂) |
|---|---|
| Sample Temperature | 5-40°C |
| Power Supply | 100 – 240 VAC, 50/60 Hz |
| pH Range | Not applicable |
| pH Accuracy | Not applicable |
| Conductivity Range | Not applicable |
| Conductivity Accuracy | Not applicable |
| Temperature Range | 5-40°C |
| Display | Graphical display with backlight |
| Outputs | Two 0/4 – 20 mA isolated current outputs Two alarm relays Modbus RTU/TCP |
| Operating Temperature | 5 – 45 °C (41 – 113 °F) |
Important safety notices and precautions for using the equipment.
Explanation of hazard symbols (DANGER, WARNING, CAUTION) and their meanings.
Detailed instructions and warnings for mounting the sensor in various configurations.
Table detailing sensor wire connections to the controller module pins.
Detailed list of sensor settings and parameters to configure for optimal performance.
Steps for zero calibration and calibration with reference or process samples.
Detailed steps for cleaning the sensor to ensure optimal performance and lifespan.
