Hach TSS sc - Sensor Setup Details

19
Operation
CONFIGURE
EDIT NAME
Name can include up to 16 characters,
FACTORY CONFIG: device number
MEAS UNITS
TRB: (FNU, EBC, TE/F, NTU, FTU)
TS: (mg/L, g/L, ppm, %)
FACTORY CONFIG: FNU
PARAMETERS TRB, TS, FACTORY CONFIG: TRB
CLEAN. INTERVAL 15 min, 30 min, 1 h, 4 h, 12 h, 1 day, 3 days, 7 days, FACTORY CONFIG: 4 h
RESPONSE TIME 1 to·300 s, DEFAULT CONFIG: 60 s
LOGGER INTERVAL
10 s, 30 s, 1 min, 2 min, 3 min, 4 min, 5 min, 6 min, 10 min, 15 min, 30 min,
FACTORY CONFIG: 10 min
SET DEFAULTS Security prompt, reset to default configuration for all menu options listed above.
4.4.2 SENSOR setup
SELECT SENSOR (if there is more than one sensor)