MPPT SOLAR CHARGE CONTROLLER
10A,20A,30A,40A,50A,60A
Dear customer
Thank you very much for the trust you have placed in us. You have acquired a reliable
high-quality product which will deliver good services for a long time if used appropriately.
Please read these instructions for use thoroughly and completely to familiarize yourself which the
product prior to putting it into operation. You receive important for safe operation and
maintenance of the device.
The pack contains: MPPT solar charge controller, operating instructions, remote(optional) remote
display(optional)
Intended use
The solar charge controller of the MPPT series was developed to charge lead batteries in a solar
stand-alone system. The product is designed for private use only and not suitable for commercial
use. The user must ensure that the device is protected against humidity and damp. Any other use
than described before may damage this product; in addition, Improper use may result in serious
hazards, such as short-circuiting, fire, electrical shock etc.
The entire product must not be modified or converted and the housing must not be opened in
any manner whatsoever!
Safety instructions
Dear customer,
The following safety notes and hazard warnings serve not only for the protection of the device
but also for the protection of your health. Please read the following points thoroughly. In case of
property damage or personal injuries caused by improper handling or non-observance of these
operating instructions or the safety notes stated herein, the warranty/guarantee expires. We
assume no liability for any consequential damages.
To Next Page
Loading...
Need help?
General