General
●For safety and technical approval reasons(CE), the unauthorized conversion and /or
modification of the product is not permitted.
●This device is not a toy and must not be used by children! Please ensure childproof operation
and storage of the device at any time.
●Maintenance, installation or repair works may only be performed by an expert/qualified
workshop. Use only original spare parts for repair work. The use of any other spare parts may
lead to serious damage to properly and personal injury!
●The interior of the device does not contain any product components which must be set or
maintained by you.
●Don’t leave packaging material heedlessly.It could become a hazardous toy for children!
●Handle the product with care;impacts,shocks or even a fall from a low height may cause
damage.In this case the solar charge controller has been qualified expert before restart.
●If you detect damages, stop operating the device.Bring it to a qualified workshop or dispose of
it in an environmentally compatible manner.
Operation
●The product may only be operated in a dry environment. It may not get humid or wet;
otherwise there is a risk of life-threatening electrical shocks.
●The use of the product under unfavorable environment conditions must be avoided under all
circumstances. Unfavorable environmental conditions include: ambient temperatures above
50ć,flammable gases, solvents, vapors, dust, relative humidity in excess of 80%,and moisture.
●The device may not be operated near of flammable materials, open fire or gases. Explosion
hazard!
●Ensure proper ventilation during the operational phase, never cover the solar charge controller
and connected devices.
●Protect the solar charge controller against electro-magnetic fields as well as impacts and
vibrations.
●Protect the solar charge controller against heat! Should the solar charge controller become too
hot due to high ambient temperatures, the overheat protection switches the device off to avoid
consequential damage. In this case wait until the device has cooled down.