Hafco BP-360 - SPECIFICATIONS

5
OPERATION MANUAL
MODEL BP-255 BP-310 BP-360
Throat Capacity (mm) 245 305 340
Wheel Diameter (Ø) (mm) 255 310 360
Height Capacity (mm) 152 165 225
Table Size (mm) 360 x 320 480 x 390 545 x 515
Table Tilt 0 - 45° 0 - 45° 0 - 45°
Frame Type Steel Steel Steel
Blade Guide Type Ball Bearing Ball Bearing Ball Bearing
Motor Power (kW / hp) 0.37 / 0.5 0.75 / 1 1.1 / 1.5
Cutting Speeds (m/min) 400 / 800 370 / 800 370 / 800
Voltage / Amperage (V / amp) 240 / 10 240 / 10 240 / 10
Blade Order Code (Suits) W950A, W950B, W950F W420A, W420B, W420F W955A,W955B, W955F
Blade Size (L x W ) (mm) 1826 x 3-12.5 2240 x 3-20mm 2560 x 3-25mm
Floor Space (W x D x H) (mm) 750 x 650 x 1430 830 x 700 x 1590 920 x 800 x 1710
Shipping Dimensions (L x W x H)
(mm)
1020 x 450 x 380 1230 x 530 x 435 1350 x 575 x 440
Nett Weight (kg) 42 65 82
1.2 SPECIFICATIONS
NOTE:
The specications in this manual were current at time of publication, but because of our policy
of continuous improvement, HAFCO reserves the right to change specications at any time and
without prior notice, without incurring obligations.