64
English
Dialock Door Terminals DTSH, DTSH FH - Status: 07.2008 - 732.29.134
Installation Instructions
If no red clearing key is presented to the control panel within 5 sec-
onds, the procedure will be automatically interrupted.
The red clearing key must be presented to the control panel again to
complete the initial start-up.
When the key has been trained successfully, the LED will be perma-5.
nently blue and an acoustic signal will be heard. The Dialock DTSH
door terminal then goes into normal operating mode.
If persistent errors occur:
ð Notify the service location.
To Next Page
Loading...
Need help?
General
