12
3. OTHER FUNCTIONS
a. Security Mode
b. Alarms
Security lockout mode
After 5 consecutive unsuccessful attempts of entering a Password, the lock will sound an
alarm and be unresponsive for 5 minutes. Physical key and Bluetooth Unlock can be used
to unlock in this state.
Fire Detection Alarm
When the sensor on the inside of
the door detects a temperature
between 50-70
O
C for a sustained
period of time, the door will
unlock automatically with a loud
alarm sound to allow you to exit.
To disable re detection alarm,
remove one battery.
Obstruction Alarm
The mortise will keep ringing when it
is unable to lock/unlock completely.
This happens when the lock is low in
battery, or the mortise alignment
is o. If the warning sound contin-
ues, please change the batteries or
close the door completely. To disable
the alarm: Use Bluetooth key or valid
password to disable the alarm.
External dual locking mode:
Internal dual locking mode:
External/Internal Dual Locking
Setting: Within 15 seconds from closing the door, press and hold “#” button on
outdoor body for 5 seconds to enable dual locking function.
Cancellation: Open the door by registered password, card or Bluetooth key, dual
locking function will be disable.
Setting: Press “Open/Close” button” for 5 seconds. It sounds “beep” for success.
Cancellation: Pull down the handle or press and hold open/close button for more
than 5 seconds to disable the function and open the door.
When the external dual locking is set, the door does not open in spite of pressing “Open/-
Close button” from the indoor. When press the “Open/Close” button, the alarm will activate in
5 minutes.
If you set the indoor dual locking mode with the door closed, the door is not opened through
the valid password/card/Bluetooth key is applied from outside. Only Owner Bluetooth key
and Admin Password can unlock.
To Next Page
Loading...
