Date : 20/09/2012
6T 8205-02a
User manual
INTRODUCTION
4
1.4 Start-up
On power up, the domovea touch panel starts automatically. The IP address is configured through dynamic
addressing (DHCP) allowing automatic connection to the network.
It also automatically detects the presence of the domovea server on the network and connects to it.
Nevertheless, it may be that this connection is not made. In this case, the view below appears:
This view is used to:
- Select the domovea server to which you wish to connect
(see below).
- Access the parameter setting menu by clicking on
(see section 3).
- Select the language by clicking on .
- Switch off the system by clicking on .
Selecting the domovea server:
Click on the bar to display the list of domovea servers available on
the network. Select the server to start up the application.
Click on to search for the servers available on the network.
When you click on , a keyboard appears. Enter the name or
IP address of the server, if it has not been automatically detected.
Click 'connect' to start the application or to return to the
previous view.
To Next Page
Loading...